GANNOMAT JUNIOR dowel and slotted hole drilling machine, Type 320, built in 1990, with grid and 2 levels, available for delivery, EXCELLENT CONDITION

Updated on
Add to wish list
Brand
GANNOMAT
Year of construction
1990
Condition
Used
LUHOMA

City: DE, Mühlhausen

Ask a question About vendor

Active since

Seller information
Description

GANNER JUNIOR 320 LBM dowel and slotted hole drilling machine

In very good condition, as good as new; the machine comes from a small joinery workshop where it was used
very sparingly. It can be
used to mill slotted holes and drill dowel holes on two levels without re-clamping. 380V, 1500W
, speed: 2,800 rpm
Year of manufacture: 1990
. With this machine, you can mill slotted holes for items such as lock cases and similar items, or create
all types of frame dowel joints – at right angles, butt joints and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window and staircase construction, and for similar applications
. Thanks to drilling on two levels, the grid and stops, and the machine’s design, dowel joints are produced in no time at all, making the machine highly cost-effective
. The machine requires a compressed air supply of 6 bar (air consumption is very low)
. It mills and drills very well and cleanly
in a clockwise
direction, featuring 2 angle stops (a centre stop and a side stop that can be used on either side)
; 2 stop rails can be fitted on the left and right, the stop rails are 1000 mm long, each with 2 folding stops
; workpiece clamping is carried out using 2 pneumatic clamping cylinders
; height adjustment from one drilling level to the other is also pneumatic, the pneumatic switch for this is located at the front of the machine, ensuring rapid adjustment of the indexing marks and drilling levels
. With a precision 12 mm indexing rail, which features
a centre mark and 12 marks on the left and right, the machine can be quickly converted for slotted hole milling, The machine can then be used without the grid, with two adjustable stops on the left and right, and has a maximum working width of 420
mm. The maximum drill hole height is 100
mm; the maximum drill hole depth is 150 mm with stop and scale
; the maximum workpiece height is 160
mm. Everything works perfectly
. We will personally deliver and demonstrate the machine throughout Germany for €220.00, so there is no risk involved in your purchase. Delivery to Austria and the EU is also available
on request. The machine table is 870 mm wide, 140 mm deep at the sides and 350 mm deep
in the centre. Professional-grade equipment, not some DIY shop rubbish
. You can start working
with the machine straight away using a 2-jaw drill chuck up to 20
mm. Very sturdy and durable construction
; the precision guides with their play-free ball bearing bushings are in good condition and operate smoothly.

Features
Location (country)
Germany
Condition
Used
Find similar
Listing no. 4266 online since Report listing