HOFFMANN HT 200 slotted hole and dowel drill, swivelling, with grid, available for delivery, EXCELLENT CONDITION

Updated on
Add to wish list
Brand
HOFFMANN
Year of construction
1994
Condition
Used
LUHOMA

City: DE, Mühlhausen

Ask a question About vendor

Active since

Seller information
Description

HOFFMANN HT 200 dowel and slotted hole drilling machine

In very good condition; the machine comes from an educational institution, has been used very little and is as good as new; it shows very few signs
of use; it can be used to mill slotted holes and drill dowel holes; the drilling depth can be
read very accurately on a digital display; with 3 drill chucks: for drill bits with an M10 external thread and for drill bits with 12 mm and 16 mm shanks
with workpiece- Swivelling support arms on the left and right, each with
a support roller. The machine has a chassis
with two angle stops on the machine table for left and right
; the clamping arms are adjustable and can be moved
. 380V, 1400 and 1800W thanks to the two speed ranges
of 1400 and 2850 rpm
. Year of manufacture: 1994
. Weight: approx. 280 kg
. With this machine, you can mill slotted holes for, for example, lock cases and similar items, or produce
all types of frame dowel joints – at right angles, butt joints and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window and staircase construction, and similar applications
. The drilling unit can be swivelled up to 65° on both sides and has a detent at 0°, which means the machine is also excellent for
drilling handrail spindles into stair stringers. Thanks to the two speed ranges, even large-diameter drill bits can be used without the drill overheating
during drilling. Owing to the locking notches, stops and the machine’s design, dowel joints can be produced in no time at all, which makes the machine very cost-effective
. The machine requires a compressed air supply of 6 bar (air consumption is very low)
. It mills and drills very well and cleanly
in a clockwise
direction. The workpiece is clamped using two pneumatic clamping cylinders operated by a foot pedal
. Thanks to the linear laser at the top of the machine, marked dowel holes and angled holes can be
drilled very quickly and accurately using a precision12 mm grid rail, which has
a centre mark and 13 marks on the left and right. Working travel in width: max. 330 mm
. The maximum drill hole height is 90 mm
. The maximum drill hole depth is 200 mm with a stop
; the maximum workpiece height is 150
mm. Everything works perfectly
and comes with an instruction
manual. We will personally deliver and demonstrate the machine throughout Germany for €220.00, so there’s no risk involved in your purchase. Delivery to Austria and other countries is also possible
on request. The machine table is 1,100 mm wide and 250 mm deep
. A professional-grade machine, not some DIY shop rubbish
. You can start working
with the machine straight away. It has a very sturdy and durable construction
. The precision guides with their play-free ball-bearing bushings are in good condition and move smoothly; the swivel mechanism is also very smooth-running thanks to a ball bearing; locking is possible via a locking screw.

Features
Condition
Used
Find similar
Listing no. 4268 online since Report listing