Soil compactor

Price
Manufacturer
Condition
Year of construction
Operating hours
Weight
Engine power

Buy new and second-hand vibratory plates, rammers and trench rollers – Bomag, Weber MT, Husqvarna, Wacker Neuson, Ammann – directly from specialist dealers. Without compaction, any sub-base will settle: paving, cable trenches, foundations, backfill and paths. We stock hand-guided soil compactors ranging from 60-kg forward-only plates to 800-kg reversible plates and trench rollers, mainly from Kraus Baumaschinen in Frankenthal (authorised Bomag and Weber dealers) and GSK Baumaschinen from Hanhofen – with operating weight, engine power and year of manufacture listed in the advert.

Which soil compactor is right for your job?

Walk-behind vibratory plates, 60–120 kg: Weber CF 1/CF 2, Bomag BP 10–20, Husqvarna LF 80. For paving, slab paths, asphalt repairs and small areas. With a rubber mat, also suitable for concrete paving without causing damage.

Reversible vibratory plates, 130–500 kg: Weber CR 1 to CR 8, Bomag BPR 25/50 to BPR 70/70, Husqvarna LG 400. Forward and reverse operation, 25–70 kN compaction force, compaction depth up to 60–80 cm in crushed stone and gravel. The class for civil engineering, sewer construction and backfilling. Diesel or petrol; electric start on the larger models.

Heavy reversible plates, 500–900 kg: Bomag BPR 100/80, Weber CR 9/CR 10, Ammann APH. Up to 100 kN, for base courses in road construction, large backfills, cohesive soils.

Vibratory rammers, 60–80 kg: Bomag BT 60/65, Weber SRV 300/590/620, Husqvarna LT 6005. For narrow trenches, pipework areas, foundation trenches, cohesive soils – wherever a plate compactor cannot be used. Petrol (2- or 4-stroke) or battery-powered.

Trench rollers and duplex rollers: Weber DVH 655, Husqvarna LP 6505, Bomag BW 65/BW 80 AD. Hand-guided rollers for trenches, asphalt repairs and road construction; the larger self-propelled rollers can be found under ‘Rollers’.

What we look for in a second-hand soil compactor

Exciter unit: The heart of the plate. Bearing noises, oil level and condition in the exciter, and whether it is leaking. A faulty exciter reduces the machine’s value significantly.

Base plate and rubber buffers: Worn or cracked base plate (particularly at the edges), cracked or hardened vibration dampers between the upper section and the plate – this causes the vibration to be transmitted to the engine and guide bracket.

Engine and clutch: Cold start (petrol: spark plug, carburettor; diesel: compression, glow plug), smoke pattern, centrifugal clutch and V-belt (slippage under load). Check the electric starter and battery on diesel plates.

Reversing and hydraulics: For reversing plates, check the forward-reverse changeover – it must switch cleanly and without delay; hydraulic lines must be leak-free.

Operating hours and documentation: Compressors often do not have an hour meter – the condition of the unit, buffers and exciter is what counts. CE marking, declaration of conformity, annual inspection by a qualified person.

UnitWeightCompression forceApplicationModels in stock
Guide plate60–120 kg10–20 kNPaving, paths, asphalt repairWeber CF 1/2, Husqvarna LF 80
Reversible plate130–500 kg25–70 kNCivil engineering, sewers, backfillingWeber CR 1–8, Bomag BPR 25/50–70/70, Husqvarna LG 400
Heavy-duty reversible plate500–900 kg70–100 kNBase course, road constructionBomag BPR 100/80
Tamping roller60–80 kg—Trenches, pipe trenches, cohesive soilBomag BT 60/65, Weber SRV 300–620, Husqvarna LT 6005
Trench roller / Duplex roller500–1,900 kg—Trenches, asphalt, road constructionWeber DVH 655, Husqvarna LP 6505, Bomag BW 80 AD

Brands and dealers

Bomag (Boppard) and Weber MT (Bad Laasphe) are the German market leaders in walk-behind compaction technology; Wacker Neuson, Ammann and Husqvarna Construction round out the field. Our dealers: Kraus Baumaschinen in Frankenthal (authorised Bomag and Weber dealer, new machines and certified used equipment) and GSK Baumaschinen in Hanhofen (Husqvarna, Bomag). Filter by manufacturer, weight, engine power and condition.

Frequently asked questions about vibratory plates and rammers

Which vibratory plate do I need for paving?

For concrete paving and slabs, a forward-moving plate weighing 60–100 kg with a rubber mat (prevents chipping at the edges). For the sub-base layer underneath, use a reversible vibratory plate weighing 200 kg or more. Rule of thumb: the more cohesive the soil and the thicker the layer, the heavier the plate should be.

Vibratory plate or rammer?

A rammer is suitable for narrow trenches, pipe laying areas and cohesive, loamy soils – the impact energy penetrates deeply. A vibratory plate is suitable for large areas, crushed stone, gravel and sand. In sewer construction, you usually need both.

How much does a second-hand vibratory plate cost?

Small lead-in plates are available second-hand from low four-figure sums; reversible plates weighing 300–500 kg are in the mid-four-figure range; heavy diesel reversible plates and trench rollers are priced higher than that. Factors driving up the price include weight, compaction force, drive type (diesel/electric start) and the condition of the vibrator unit and the plate.

How deep does a vibratory plate compact?

Roughly speaking: 100 kg to about 20–25 cm, 200 kg to about 35–40 cm, 400–500 kg to 60–70 cm, 800 kg to 90 cm – in non-cohesive material. Cohesive soils require rammers or roller pads.

Petrol, diesel or battery?

Petrol is light and cheap (vibratory plates up to 200 kg, rammers). Diesel for heavy reversible plates and continuous use; more economical; electric start. Battery-powered rammers and vibratory plates are useful for trenches and indoor work without exhaust fumes, but are still rarely found second-hand.

Can I lease compaction equipment or finance it via hire purchase?

For many listings, you can submit a non-binding leasing or hire-purchase enquiry directly. You can discuss the terms with the dealer or their finance partner; the purchase and payment are handled directly between you and the seller.

An overview of all types: Construction machinery · Self-propelled: Rollers · For trenches: Mini-excavators

GSK-57894
In stock
€2,26000
100%
Soil Compaction : The BOMAG BT 65 is a compact vibratory rammer with a net weight of 68 kg and a vibration force of 17 kN, designed for professional compaction work on tight construction sites.
Item number
GSK-57894
Model
BT 65
KRAUS-1853
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1853
Model
CR 2
GG2278
In stock
€1,50000
Frankenthal, DE
Item number
KRAUS-GG2278
Model
CR 2
KRAUS-1855
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1855
Model
BPR 50/55 D Stoneguard
GG3713
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-GG3713
Model
BW 80 AD
KRAUS-1809
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1809
Model
CR 3-II
KRAUS-1852
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1852
Model
BPR 50/55
KRAUS-1690
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1690
Model
BT 65
KRAUS-1691
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1691
Model
BPR 35/60 D
20098734
In stock
€14,50000
Frankenthal, DE
Item number
KRAUS-20098734
Model
DVH 655 E-2
KRAUS-1303
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1303
Model
Rüttelplatte CF 1
KRAUS-1304
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1304
Model
Rüttelplatte CF 2
KRAUS-1305
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1305
Model
Rüttelplatte CR 1
KRAUS-1306
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1306
Model
Rüttelplatte CR 5
KRAUS-1307
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1307
Model
Rüttelplatte CR 8
KRAUS-1308
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1308
Model
Stampfer SRV 300
KRAUS-875
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-875
Model
LT6005
KRAUS-876
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-876
Model
Rüttelplatte BPR 40/60 D
KRAUS-1008
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1008
Model
Rüttelplatte CR 3
KRAUS-1009
In stock
Contact us for a price
Frankenthal, DE
Item number
KRAUS-1009
Model
Rüttelplatte CR 6
Show other 20 products